2022 Stratasys F370CR Composite 3D Printer - Romania

Hours on display: 1147. System Size/Weight: 1626 x 864 x 711 mm (64 x 34 x 28 in.) 500 lbs ( 227 Kg). Build Tray Dimensions: 305 mm x 254 mm x 305 mm (12 x 10 x 12 in.) Material Delivery: 4 material spool bays, 2 for model, 2 for support located in a drawer on the front of the unit. Achievable Accuracy: Parts are produced within an accuracy of +/- .200 mm (.008 in), or +/- .002 mm/mm (.002 in/in), whichever is greater. Network Connectivity: Wired: TCP/IPv6 protocols at 100 Mbps minimum 100 base T, Ethernet protocol, RJ45 connector. Wireless-ready: IEEE 802.11n, g, or b; Authentication: WPA2-PSK, 802.1x EAP Encryption: CCMP, TKIP. Operator Attendance: Limited attendance for job start and stop required. Software: GrabCAD Print and Insight software, MTConnect enabled. Operating Environment: Operating: Temperature: 15 – 30 ºC (59 – 86 ºF), Humidity: 30 – 70% RH, Storage: Temperature: 0 – 35 ºC (32 – 95 ºF), Humidity: 20 – 90% RH. Power Requirements: 100-132V/15A or 200–240V/7A. 50/60 Hz. Regulatory Compliance CE (low-voltage and EMC directive), FCC, EAC, cTUVus, FCC, KC, RoHs, WEEE, Reach, RCM. Operating System: Windows 10 (64 bit only) and Window 11 with a minimum of 4GB RAM (8GB or more recommended). Model Material: ABS-M30, ASA, FDM TPU 92A, ABS-ESD7™, PC-ABS™, Diran™ 410MF07, ABS-CF10, FDM Nylon-CF10. S/No. D80068 (2022)