
General Workshop
Workshop engineering equipment is essential for any workshop or manufacturing facility.
What is in the General Workshop category?
The General Workshop category includes all Balancing Equipment, Bead Blast - Shot Blast Machines, Broaching and Key Seating, Chemical and Surface Treatment, Compressors and Associated Equipment, Cranes - Over Head, Jib and mobile cranes, Drilling, Dust Extractors - Industrial Vacuum Cleaners, Forklift Trucks and Motorized Factory Vehicles, Generators, Grinding, Inspection Equipment, Machine Vices, Rotary Tables, Angle Plates, Dividing Heads, Ovens - Furnace - Heat Treatment – Autoclaves, Power hand Tools Electric and Pneumatic, Pumps, Motors, Actuators, Robots - Automated Parts Handling, Sawing, Broaching, Slotting, Shaping and Planing Machines, Testing Equipment - Electronic and Mechanical, Tooling, Transformers, Welding, Workshop Miscellaneous.
General Workshop equipment currently available
Filtering
- 5 Unused Siemens 1LE1003-OCB29-OGB4-Z Electric MotorsPower 0.12 kW. Voltage 400V.
- (1) Mosa 'GM 5-200 KBM' Petrol Engine Driven Open Frame Welder Generator (Unused)Electric start; 200 Amp; Kohler CH440 Command Petrol Engine; Single phase asyncronous alternator; Tank capacity 6.1 litres; 230/110 volt sockets;
- 72" Conference Table, [4] Rolling Chairs, [3] Bookshelves72" Conference Table, [4] Rolling Chairs, [3] Bookshelves, Located: 4 Warehouse Lane, Elmsford, NY
- Storage Lockers, [2] Wood BenchesStorage Lockers, [2] Wood Benches , Located: 4 Warehouse Lane, Elmsford, NY
- Fanuc S-430iW04274 Handling robot & Control cabinetDimensions HxLxW 1,400 x 1,200 x 1,800mm. Electric Connection (v) 400. Weight 1,300kgs. (2000). Working Hours: 46,463.
- Azelio Stirling Engine A-SE13-1Dimensions: 1,040 x 725 x 1,900mm. Weight: 510kg. (2021).
- SawStop Model PCS31230 10" Table Saw with Rip Fence, Table ExtensionSawStop Model PCS31230 10" Table Saw with Rip Fence, Table Extension, S/N: P192433647
- 5 Bofa Fume elimination T1 Tip solder fume extractor unitsVoltage 230V. Overall Dimension 180 x 180 x 280mm.
- Coils Of Heavy Duty ChainCoils Of Heavy-Duty Chain, Located: 4 Warehouse Lane, Elmsford, NY 10523
- 2 Danfoss Brazed Heat Exchangers XB05M-1-50 Code=079G1153Max Working Pressure 25 bar, 180 °C. Approx Dimensions 300 x 76 x 105mm. (2021).
- Wardwell Braiding machineOverall Dimensions 300 x 1,000 x 1,600mm. Voltage 380V. Working Hours 4,750.
- Image not availableFairbanks 6-14 Wood Platform Cart 72" x 36"Fairbanks 6-14 Wood Platform Cart 72" x 36"
- (1) Mosa 'GM SX-11000 KDT' Diesel Generating Set (2023 - Unused)Electric Start; Kohler KDW 702 engine, 3 phase synchronous alternator; Midac battery; 38 Litre capacity;
- BIG Daishowa Angle Head BBT50-AG90/NBS20-230S 90˚ Live Tooling HeadCollet Spindle. Maximum Reverse Speed 3,000RPM. Speed Ratio 1:1
- Like New Chenfeng CF-405A Hydraulic Swing Arm Cutting PressSuitable for cutting leather, card board, fabric plastic, rubber, asbestos, cork, felt, cellophane, etc. because of fully hydraulic operations and light allow arm ensure maximum pressure guarantee and maximum protection to the cutting knive...
- Unused Hydra Specma Hydraulic power unit 8Power 0.75kW. Working Pressure 160 bar. Tank Capacity 15L. Dimensions: 350 x 240 x 550mm.
- 4.25 CU. Ft. Portable Cement Mixer, 3/4-HP 120V Electric, 36 RPM Drum Speed, 290# Capacity4.25 CU. Ft. Portable Cement Mixer, 3/4-HP 120V Electric, 36 RPM Drum Speed, 290# Capacity, S/N: FNYMD464091958271
- 1 Lot Assorted ToolingComprising: Assorted Vee Blocks Plus (1) Adjustable Angle Gauge;
- SCA PPW57-200p16RE Air Powered Dump PumpMaterial Pressure 350 bar. Overal Dimension 1,050 x 650 x 2,000mm. Weight: 200kg.
- 42" X 108" X Approximately 15' High Adjustable Pallet Racking42" X 108" X Approximately 15' High Adjustable Pallet Racking, Located: 4 Warehouse Lane, Elmsford, NY
- Fanuc R-2000iA, 210F24245 Handling robot & Control cabinetDimensions HxLxW 1,400 x 1,200 x 1,800mm. Electric Connection (v) 400. Weight 1,300kgs. (2006). Working Hours: 20,934.
- 2021 Load Surfer EFS 1030 Mobile Manual Hydraulic Hand StackerRated Capacity 1,000kg. Maximum Lift Height 3,000mm. Load Centre 500mm. Fork Dims. 900 x 140mm. Adjustable Fork Width 300 ~ 740mm. Overall Dimensions (W)800 x (D)1496 x (H)2060mm. Weight 332kg. S/No. 21052049/041 (2021)
- Extech Millohm Model 380560 Milliohm MeterExtech Millohm Model 380560 Milliohm Meter, VTest Voltage2.7V DC; 3.3V DC; 3.5V DC; 4.1V DC; 4.5V DC
- 2 Workshop screensorigin France - approx. weight 10kg. Loading charges: 30 Euros
- (1) Mosa GE 12000 HZDT-LAVR Diesel Generating Set (Unused)Hatz ID90 Diesel Engine, three phase synchronous alternator; 18 Litre fuel tank capacity; 400/230 volt;
- (2020) ABB 3~Phase Generator ABB 3GAA162420-ADK+VC"Power 13.19kW. Weight 140kg.
- (3) Starrett 436M Type Outside MicrometersComprising: (1) 75mm-100mm Capacity; (1) 100mm-125mm Capacity; (1) 125mm-150mm Capacity; In Wooden Box
- BIG Daishowa Angle Head BBT50-AG90/NBS6-245S 90˚ Live Tooling HeadCollet Spindle. Maximum Reverse Speed 6,000RPM. Speed Ratio 1:1
- BIG Daishowa Angle Head BBT50-AG90/NBS13-275S 90˚ Live Tooling HeadCollet Spindle. Maximum Reverse Speed 6,000RPM. Speed Ratio 1:1
- 2 Danfoss Brazed Heat Exchangers XB05M-1-50 Code=079G1153Max Working Pressure 25 bar, 180 °C. Approx Dimensions 300 x 76 x 105mm. (2021).
- (2) Machine Tooling AttachmentsComprising: (1) Boring Head & (1) SM4 Tapmatic Tapping Attachment
- Hp Laserjet Pro 400 M401Dw & Kyocera Ecosys Fs-4100DwHp Laserjet Pro 400 M401Dw & Kyocera Ecosys Fs-4100Dw, Located: 4 Warehouse Lane, Elmsford, NY
- C.H.I. Rolling Steel Doors Model 6221 10' x 10' Roll Up DoorC.H.I. Rolling Steel Doors Model 6221 10' x 10' Roll Up Door, On Ground Ready To Move
- 11-Sections 42" X 96" X Approximately 16' High Adjustable Pallet Racking11-Sections 42" X 96" X Approximately 16' High Adjustable Pallet Racking, Located: 4 Warehouse Lane, Elmsford, NY
- 2001 Rosler R180 SO Vibratorty Bowl With Tanks & ControlInternal Bowl Ø900 x 500mm Deep. With Control, Filtration & Pump. S/No. 28120/01 (2001). NOTE - A Loading Charge of £ 50 plus VAT (if applicable) Will Be Added to the Invoice.
- System TM Opti-kap 5003System TM. Opti-kap 5003. Were running at about 50 meters per minute per Opti-kap. Individual controls. Have been running 38 x 76 up to 50 x 152. Servo control chop saw. Nominal electrical panel current: 37.5 Amps (50 Amps installed) each. ...
- (1) Mosa GE15000 HBM Petrol Generator (2022 - Unused)Honda Engine with electronic speed control; Electronic injection; Auto starter; Protective frame;
- Ing. O.Fiorentini S.r.l Floor cleaner / scrubber Delux 43Power 1.1kW. Voltage 230V. Overall Dimension 1,300 x 800 x 1,000mm.
- BIG Daishowa Angle Head BBT50-AG90/NBS20-230S 90˚ Live Tooling HeadCollet Spindle. Maximum Reverse Speed 3,000RPM. Speed Ratio 1:1
- Hyster S50C LPG ForkliftLifts to full height, tilts and has side shift 5.5M max lift / 1.9 tonne capacity. Recently had the following parts replaced: Battery & LPG regulator. Recently serviced: including oil and filter, plugs, fluids topped up and bearings grease...
- Specma HGB1H-250-140-0120 250.00Capacity 12 ltr. Dimension 160 x 160 x 910mm. (2020).
- Vacuupump GMB 14.6Power 43.1kW. Delivery 24.4 m3. Overall Dimensions 900 x 550 x 500mm.
- Ametek Mdl. 750H3-18C Battery ChargerAmetek Mdl. 750H3-18C Battery Charger, Located: 4 Warehouse Lane, Elmsford, NY
- Miller Millermatic 150 120-AMP Mig Welding Power Supply with CartMiller Millermatic 150 120-AMP Mig Welding Power Supply with Cart, S/N: KF886607
- Sitma Height Adjustable Belt ConveyorBelt Dimension 6,000 x 360mm. Voltage 380v. Overall Dimension 3,360 x 500 x 1,020mm. S/No. 24.
- Buhler 0KF028/30LP Rotary ValveOpening: 265 x 140mm. Cell: 270 x 70mm. Overall Dimensions: 700 x 400 x 440mm.
- BIG Daishowa Angle Head BBT50-AG90/HMC32-230S 90˚ Live Tooling HeadCollet Spindle. Maximum Forward Speed 3,000RPM. Speed Ratio 1:1
- 30" Samsung Flat Screen30" Samsung Flat Screen, Located: 4 Warehouse Lane, Elmsford, NY
- Steel Fabricated Heavy Workbench With Adjustable Steel ArmsApprox Dimensions L3,050 x W910 x H910mm.
- Contents Of Office, Including: Wood Desk, [2] Rolling Chairs, Desk W/ Overhead Storage, BookshelfContents Of Office, Including: Wood Desk, [2] Rolling Chairs, Desk W/ Overhead Storage, Bookshelf, Located: 4 Warehouse Lane, Elmsford, NY
- BIG Daishowa Angle Head BBT50-AG90/NBS13-275S 90˚ Live Tooling HeadCollet Spindle. Maximum Reverse Speed 6,000RPM. Speed Ratio 1:1
- Eston DHG-9240A Low Temperature Air Drying OvenTemperature Range Ambient +10° To 200°C. Approx Capacity 240L. Approx Internal Dimensions W500 x D600 x H750mm. Maximum Power 2.3kW. With Digital Display. Power Rating 2.3kW. Voltage 240v. S/No. DHG220101.
- BIG Daishowa Angle Head BBT50-AG90/NBS20-230S 90˚ Live Tooling HeadCollet Spindle. Maximum Reverse Speed 3,000RPM. Speed Ratio 1:1
- 39" X 79" X 28" High Wood Table39" X 79" X 28" High Wood Table, Located: 4 Warehouse Lane, Elmsford, NY
- Herbert WKT 41/25 Single Spindle Drilling MachineRise & Fall Table Dimension 610 x 1,445mm (2 'T' Slots). Speed Range 106-145mm (0.9HP Motor). Morse Taper MT3.
- PVD Coating System Von-Ardenne - High-Power Electron Beam Gun - Gun#1Comprising of Gun 1 (+81) and PSU (+61) and (+71). **PLEASE NOTE This Lot is included in the Collective Lot 2. At the end of the Auction, it is at the sole discretion of the Seller whether to accept the bid on this individual Lot or the Col...
- 45-Cubby Hole Metal Paper Shelf, Rolling Plastic Cart, Easel Board45-Cubby Hole Metal Paper Shelf, Rolling Plastic Cart, Easel Board, Located: 4 Warehouse Lane, Elmsford, NY
- BIG Daishowa Angle Head BBT50-AG90/NBS13-275S 90˚ Live Tooling HeadCollet Spindle. Maximum Reverse Speed 6,000RPM. Speed Ratio 1:1
Manufacturers
Manufacturers that are normally found in this category are Acco, American, Blastec,Inc, Finnblast, Caldwell, Caterpillar, Cleveland Crane, Cummins, Demag, Fronius, Gietart, Kone, Lincoln, Miller, Oerlikon, Plymovent, Siemens, Street, Viking, Wheelabrator.
General Workshop Auction FAQs
I've won something! Now what?
Congratulations! Buyers will be notified by invoice if their bid has been successful.
Do I need to pay tax on the item?
That depends. Sales tax is payable at the prevailing rate on all goods purchased. For sales made out of the UK, VAT is charged on the hammer price, the buyer’s premium and any additional charges. However, if the goods leave the UK, the VAT can be refunded on the hammer price, please provide proof of export and we can look into this for you.
Can I remove the item (s) myself?
Yes, providing that you or your contractor can fulfil the following criteria:
- Public Liability Insurance
- Licensing
- Suitable Method Statement
- Risk Assessment
- Permits to Work
- Capability and Competence
We will happily grant you access to the site once we’ve approved all of the documentation required.