GE Gas Power - BIRR Switzerland
Equipment Available As Surplus of Ongoing Business. Please See the Sale Information Section for Any Additional Fees That May Be Applicable Upon Purchasing an Item. NOTE: GE to Approve All Offers Prior to Apex Final Invoicing. Any Bidder MUST and CAN ONLY USE the GE-Approved Riggers to Work Onsite Please See Essential Information for More Details.
Ended: 30th November 2022 14:00
- Stratasys Fortus 900MC 3D Printer With Touchworks GrabCADBuild Size 914.4 x 609.6 x 914.4mm. Layer Thickness 0.127-0.508mm. S/No. 125-00300. Note: Wire Feed Needs Attention.Sale has ended
- Polysoude Autotig 600PC Orbital Hotwire Tig Welding UnitPolysoude welding current source / power source 20A / 10V - 600 A / 34V. S/No. 0968249 (2006).Sale has ended
- Polysoude Autotig 600PC Orbital Hotwire Tig Welding UnitPolysoude welding current source / power source 20A / 10V - 600 A / 34V. S/No. 0968246 (2006).Sale has ended
- ITG Induction Heating System For Rotor Heating With Siemens Simatic PLCMake-Transistorized Converter Zone 7-12. Type ITPA 6 x 1K80. Nominal Power 6 x 80kW. Nominal Voltage 600/400v. Nominal Frequency 1khz. Compensation 3 x 452 kvar. Power Connection 2x 3x 480v/60Hz. Back Up Fuse 1,000A +25A. Control Voltage 24...Sale has ended
- ITG Induction Heating SystemMake-Transistorized Converter Zone 7-12. Type ITPA 6 x 1K80. Nominal Power 6 x 80kW. Nominal Voltage 600/400v. Nominal Frequency 1khz. Compensation 3 x 452 kvar. Power Connection 2x 3x 480v/60Hz. Back Up Fuse 1,000A +25A. Control Voltage 24...Sale has ended
- TPA Brianza Turn Table With Support/Riser BlockTurn table from welding station Load capacity: max. 350 ton Height: approx. 1,900mm Diameter: approx. 3,314mm Weight: 26’000 kg Low speed range 0.004 – 0.2rpm High speed range: 0.02 - 4 rpm S/No. 20810 (2009).Sale has ended
- Ingersol Production Systems Rotor/Shaft Assembly Unit With Drive, Planetary Gear, Brake & Support BlockDesigned for: Workpiece weight= 300 tons Journal diameter max. = 1000 mm Workpiece length = 14500 mm Workpiece diameter = 7000 mm This large rotor balding station had been manufactured and installed in the USA. North America has other volta...Sale has ended
- TPA Brianza NI14030AH Cable RecoilerThis cable winding machine had been used to unroll induction heating cables. This machine can also roll up the cables and can flip the cable drum from vertical to horizontal. S/No. 21201Sale has ended
- Codere Electric Furnace Model KM170/13Approx Internal Dimensions W560 x D860 x H460mm. Maximum Temperature 1,300°C. S/No. 12-01251 (2012).Sale has ended
- Borel Electric Furnace Type 180/350Approx Internal Dimensions W555 x D575 x H690mm. Maximum Temperature 350°C. S/No. OF1677.Sale has ended
- Codere Electric Furnace Model KM10/13Approx Internal Dimensions W260 x D300 x H120mm. Maximum Temperature 1,300°C. S/No. 13-01666 (2013).Sale has ended
- Knoll FHA/1500 3 Grundfos Pump Return Filtration SystemCooling lubricant return pump station. Includes 3 pieces Grundfos Pumps Type NB50-250 and 3 Pieces Danfoss Socla FiG408, JL1040. S/No. 200314182 92003).Sale has ended
- Codere Electric Furnace Model KM10/13Approx Internal Dimensions W260 x D300 x H120mm. Maximum Temperature 1,300°C. S/No. 16-02787 (2017).Sale has ended
- ITG Systec Electrical CabinetSale has ended
- 2 Rittal Electrical Cabinets With Various Electrical ComponentsSiemens control Simatic S7-300 Siemens control module numbers: 972-0CB35-0XA0 315-2FH13-0AB0 321-1BL00-0AA0 321-1BL00-0AA0 322-1BL00-0AA0 323-1BH01-0AA0 321-1BH02-0AA0 338-4BC01-0AB0 338-4BC01-0AB0 Including several other electrical compone...Sale has ended
- Ade Scissor Lift TableApprox Dimensions L1,640 x W1,200 x H1,500mm. Max Lifting Weight 200kg.Sale has ended
- Ade Scissor Lift TableApprox Dimensions L1,640 x W1,200 x H1,500mm. Max Lifting Weight 200kg.Sale has ended
- Codere Electric Furnace Model KM10/13Approx Internal Dimensions W260 x D300 x H120mm. Maximum Temperature 1,300°C. S/No. 01396 (2013).Sale has ended
- German Sonic Clean Station Model UW 350VTank Dimension W950 x D650 x 770mm Deep. S/No. 24630 (2017).Sale has ended
- Broacher Type VKB-4/6 With 5 Drawer Cabinet Of ToolingØ200mm 3 Jaw Chuck. Approx Throat Dimension 150mm. Approx Cabinet Dimension W750 x D800 x H830mm.Sale has ended
- Presi Mecotone T350M Circular Cut Off SawWith 'T' Slotted Table 400 x 320mm. Distance From Wheel To Table 150mm. Wheel Ø355mm. With Coolant System.Sale has ended
- Ø400mm 4 Jaw ChuckSale has ended
- Ø400mm 4 Jaw ChuckSale has ended
- Reishauer Ø250mm 3 Jaw ChuckSale has ended
- 3 Cast Iron Box Angle Plates With 2 Ground ParallelsApprox Plate Dimension W300 x D200 x H150mm. Parallel W100 x D100 x L300mm.Sale has ended
- Almatic NC8-125M Machine Vice On Base PlateJaw Width 125mm. Plate Dimension 300 x 300mm.Sale has ended
- Ø210mm Schunk Rota NC Plus 210-52 3 Jaw Power ChuckSale has ended
- Lista 6 Drawer Tooling Cabinet With Kelch Tool Clamping Unit & Gressel ViceApprox Dimension W710 x D570 x H910mm.Sale has ended
- Wooden Topped Workbench With 2 Lista 4 & 6 Drawer Tooling Cabinets & Gressel ViceApprox Dimension W2,500 x D800 x H800mm.Sale has ended
- Wooden Topped Workbench With Lista 6 Drawer Tooling Cabinet & Gressel ViceApprox Dimension W2,000 x D820 x H900mm.Sale has ended
- Wooden Topped Workbench With Lista 6 Drawer Tooling Cabinet & Heuer ViceApprox Dimension W1,750 x D815 x H900mm.Sale has ended
- Lista 4 Drawer Wooden Topped Workbench With TablesApprox Dimension W560 x D570 x H1,050mm.Sale has ended
- 8 Unused Imperial Hand Taps G 3/4" & G 5/8"Sale has ended
- 110 Kennametal RPEX0602M0F701 SP6519 Indexable InsertsSale has ended
- Quantity Of Assorted Tapping ColletsSale has ended
- Quantity Of Assorted Milling CuttersSale has ended
- Quantity Of Assorted Milling CuttersSale has ended
- Quantity Of Assorted Milling CuttersSale has ended
- Quantity Of Assorted ShacklesSale has ended
- Quantity Of Assorted ShacklesSale has ended
- Quantity Of Assorted Eye BoltsSale has ended
- Quantity Of Assorted Eye BoltsSale has ended
- Quantity Of Assorted Eye BoltsSale has ended
- Quantity Of Arch (Hollow) PunchesSale has ended
- Quantity Of Arch (Hollow) PunchesSale has ended
- Quantity Of Indexable Inserted Milling CuttersSale has ended
- 5 Walter HSK 100 ToolholdersSale has ended
- 6 Walter HSK 63 ToolholdersSale has ended
- 200 Boxed Mitsubishi RPMT1040M0E4-M Indexable InsertsSale has ended
- Approx 200 Boxed Mitsubishi Indexable InsertsSale has ended
- Quantity Of Taper Shank SleevesSale has ended
- 4 Back Chamfering/Counterbore Milling ToolsSale has ended
- Quantity Of Grooving/Slitting Milling CuttersSale has ended
- Quantity Of Assorted Milling CuttersSale has ended
- Quantity Of Taper Shank HSS DrillsSale has ended
- Quantity Of Taper Shank HSS DrillsSale has ended
- Quantity Of Taper Shank HSS DrillsSale has ended
- Quantity Of Straight Shank Carbide DrillsSale has ended
- Quantity Of Assorted Milling CuttersSale has ended
- Quantity Of Assorted Milling CuttersSale has ended
- Quantity Of Assorted Milling CuttersSale has ended
- Quantity Of Assorted Milling CuttersSale has ended
- Quantity Of Assorted Milling CuttersSale has ended
- Quantity Of Shell Milling CuttersSale has ended
- Quantity Of Shell Milling CuttersSale has ended
- Quantity Of Shell Milling CuttersSale has ended
- Quantity Of Straight Shank HSS DrillsSale has ended
- Quantity Of Assorted TapsSale has ended
- Quantity Of Taper Shank HSS DrillsSale has ended
- Quantity Of Taper Shank HSS DrillsSale has ended
- 5 Unused Walter M30 Long Series Machine TapsSale has ended
- 5 Unused Walter M30 Long Series Machine TapsSale has ended
- Quantity Of Tapping ColletsSale has ended
- Quantity Of Tapping ColletsSale has ended
- Quantity Of Taper Shank SleevesSale has ended
- Quantity Of Taper Shank SleevesSale has ended
- Quantity Of Taper Shank SleevesSale has ended
- Quantity Of Taper Shank SleevesSale has ended
- Quantity Of Kaiser P55 Modular ToolholdersSale has ended
- 8 Walter HSK 100 & HSK 125 Toolholders With ToolingSale has ended
- 2 Bilz Tapping Collet Holders MS 32 & MS 40Sale has ended
- SCA 3 Jaw Manual ChuckSale has ended
- Quantity Of Bilz Collet TapholdersSale has ended
- 9 Walter HSK 100-A ToolholdersSale has ended
- 9 Walter HSK 100-A ToolholdersSale has ended
- 8 Walter HSK 100-A ToolholdersSale has ended
- 7 Walter HSK 125 ToolholdersSale has ended
- S.P.A SA-3C Taper Shank Tapping Collet HolderSale has ended
- S.P.A SA-3C Taper Shank Tapping Collet HolderSale has ended
- Large Quantity Of Walter HSK 100 ToolholdersSale has ended
- Large Quantity Of Walter HSK ToolholdersSale has ended
- Quantity Of Walter HSK 63-B ToolholdersSale has ended
- Quantity Of Assorted Ground ParallelsSale has ended
- Quantity Of Assorted Ground ParallelsSale has ended
- 3 HSK Toolholders With ToolingSale has ended
- 3 HSK Toolholders With Kaiser Boring HeadsSale has ended
- Quantity Of Kaiser Modular ToolholdersSale has ended
- Quantity Of Kaiser Modular ToolholdersSale has ended
- Quantity Of HSK Kaiser Modular ToolingSale has ended
- Quantity Of HSK Kaiser Modular ToolingSale has ended
- Quantity Of Toolholders, Back Boring Milling Cutters & DrillsHSK 100, ISO 50, Taper Shank.Sale has ended
- Quantity Of Ground ParallelsSale has ended
- Quantity Of Assorted ReamersSale has ended
- Waterloo Mobile 4 Drawer Tool CabinetSale has ended
- Quantity Of ISO 50 ToolholdersSale has ended
- 2 Unused Wika 6 bar Pressure GaugesSale has ended
- 2 Unused Wika 60 bar Pressure GaugesSale has ended
- 3 Unused Wika 6 bar Pressure GaugesSale has ended
- 2 Unused Wika 6 bar Pressure GaugesSale has ended
- 2 Unused Wika 60 & 160 bar Pressure GaugesSale has ended
- 2 Unused Wika 4 & 25 bar Pressure GaugesSale has ended
- 3 Unused Wika 4 bar Pressure GaugesSale has ended
- Manual Roller UnitSale has ended
- Quantity Of Assorted Capto C6 Toolholders With ToolingSale has ended
- 2 Ground Vee Blocks With Stepped Clamping WedgesSale has ended
- Quantity Of Straight Shank Ø32/20mm ToolholdersSale has ended
- Quantity Of Straight Shank Ø32mm ToolholdersSale has ended
- 2 Unused Brutsch Ruegger 50mm Tool Setting BlocksSale has ended
- Quantity Of ISO 50 ToolholdersSale has ended
- 3 Steel Angle PlatesApprox Dimensions W275 x D150 x H150mm, W200 x 150 x H150mm & W400 x D225 x H300mm.Sale has ended
- Trutmann Hydraulic Pump With Hose & TankSale has ended
- 2 Pibomulti ISO 50 X1055 Driven ToolholdersSale has ended
- Renauld CH-2022 Grinding Spindle in Wooden BoxMaximum Spindle Speed 28,000rpm. Ø80mm x 260mm Long.Sale has ended
- Quantity Of Indexable Inserted Turning ToolsSale has ended