KPC & Others

Capacity:- Swing over Bed 710mm Dia. Max Turning Dia 550mm. Max Turning Length 1130mm.

With LNS Eco Load Short Magazine Bar Feed. Capacity:- Swing over Bed 550mm Dia. Max Turning Dia 300mm. Max Turning Length 513mm.

Capacity:- Swing over Bed 770mm Dia. Swing over Saddle 480mm. Max Turning Dia 550mm. Max Workpiece Length 1043mm.

Table 1800mm x 650mm. Traverses X = 1500mm Y = 800mm Z = 500mm. ATC Capacity 22 Tools.

Table 800mm x 500mm. Traverses X = 630mm Y = 500mm Z = 500mm. ATC Capacity 24 Tools.

Table 950mm x 505mm. Traverses X = 760mm Y = 510mm Z = 510mm. ATC Capacity 21 Tools.

Table 950mm x 520mm. Traverses X = 760mm Y = 510mm Z = 510mm. ATC Capacity 21 Tools.

Table 1200mm x 450mm. Traverses X = 1010mm Y = 500mm Z = 500mm. ATC Capacity 20 Tools.

Table 1676mm x 889mm (66"x35"). With 24 Postion ATC. Spindle Nose 40DV/Cat.

Table 1010mm x 400mm. ATC Capacity 24 Tools. Spindle Nose 40DV/Cat.

Table 1015mm x 400mm. Traverses X = 762mm Y = 575mm Z = 609mm. ATC Capacity 24 Tools. Spindle Nose 40DV/Cat.

Table 990mm x 500mm. Traverses X = 760mm Y = 508mm Z = 508mm. ATC Capacity 24 Tools.

Table 835mm x 360mm. ATC Capacity 12 Tools.

Fitted with Knuckle Type Double Swivel Milling Head with Power Draw Bar, Spindle Nose 50 Int. Table 2110mm x 770mm.

Table 1470mm x 355mm. Traverses X = 1040mm Y = 480mm Z = 530mm.

Table 1320mm x 280mm.

Note: No Guarding Available. See Photographs. Table 1215mm x 265mm. Traverses X = 762mm Y = 305mm Z = 406mm.

Table 915mm x 320mm. Spindle Nose No 30 Quick Change

Table 860mm x 315mm. Spindle Nose No 30 Quick Change

Table 860mm x 315mm. Spindle Nose No 30 Quick Change

With 8 Station Turret. Swing over Bed 360mm Dia x 660mm B.C.

With 3 Jaw Chuck, Collet Chuck, 12 Station Turret. Distance B.C. Approx 650mm

Swing over Bed 390mm Dia x 1270mm B.C. Swing over Cross Slide 240mm. Swing in Gap 580mm.

Swing over Bed 520mm Dia x 1500mm B.C. Speeds to 1700 RPM. With 8 Station Turret

Swing over Bed 400mm Dia x 1219mm B.C. With Quick Change Tool Post & 250mm Dia 3 Jaw Chuck

Capacity:- Swing over Bed 400mm Dia. Max Turning Dia 250mm. Max Machining Length 500mm. Traverses X = 175mm Z = 520mm.

Capacity:- Swing over Bed 580mm Dia. Max Turning Dia 280mm. Max Machining Length 460mm. Traverses X = 190mm Z = 520mm.

Approx Capacity:- Swing over Bed 520mm Dia. Max Machining Length 700mm.

Approx Machining Length 380mm.

Table 1600mm x 510mm Traverses X = 1150mm Y = 480mm Z = 550mm. Speeds 50 to 3000RPM

Table 1600mm x 450mm Traverses X = 1168mm Y = 330mm Z = 432mm. Speeds Horizontal 25 to 1900 RPM - Turret 40 to 3000 RPM

Arm Radius 1371mm. Spindle Nose No 5 Morse Taper. Speeds to 1850 RPM. Power Rise & Fall to Arm

Belt & Material Width 600mm. Max Material Thickness 150mm.

Swing over Bed 535mm Dia x 2000mm B.C. Swing over Cross Slide 370mm Swing in Gap 815mm. With Two Axis DRO.

Swing over Bed 390mm Dia x 1270mm B.C. Swing over Cross Slide 240mm. Swing in Gap 580mm. With Two Axis DRO.

Swing over Bed 335mm Dia x 1000mm B.C. Swing over Cross Slide 210mm. Swing in Gap 480mm. With Two Axis DRO.

Table 1066mm x 228mm (42" x 9") With Power Feed to table & 2 Axis DRO. Spindle Nose R8

Table 430mm x 220mm. Traverses X = 300mm Y = 200mm Z = 350mm.

Number of Pallet Positions 32. Please note that this lot is located at Mold Systems, Brandon, Durham. This item must be removed from site by 30th of September

With Lower Slide Out Platen (670mm x 560mm) & Swing Down Upper Platen (660mm x 560mm) With Injector. Please note that this lot is located at Mold Systems, Brandon, Durham. This item must be removed from site by 30th of September.

Granite Surface Area 1280mm x 1045mm. Please note that this lot is located at Mold Systems, Newton Aycliffe, Durham. This item must be removed from site by 30th of September.

Table 610mm x 203mm (24" x 8") with PG Optidress Profile Wheel Dressing Attachment & Magnetic Chuck

Table 457mm x 152mm (18" x 6") Magnetic Chuck 450mm x 150mm with PG Optidress Profile Wheel Dressing Attachment & 2 Axis DRO

Capacity 355mm Dia Swing x 685mm B.C.(14" x 27")

Capacity 127mm Dia Swing x 305mm B.C. (5" x 12") With Motorised Swing Down Internal Grinding Spindle.

Throat 457mm

Throat 355mm

Max Blade Dia 350mm

Safe Working Pressure 7.5 bar - 60 CFM

Max Working Pressure 110 PSI - 40 CFM

Capacity 260mm Dia

Capacity 225mm Dia

Throat 394mm. With Blade Welder

Capacity 2mm to 32mm Dia

Table 508mm x 355mm

Single Phase

With PN2 Digital Display

Size 914mm x 610mm (36" x 24")

Speeds 350 to 3830 RPM

Single Phase

Speeds 185 to 1230 RPM

Wheel Size Approx 300mm x 38mm

Size 1219mm x 914mm (48" x 36")

Size 2438mm x 1828mm (96" x 72")

Wheel Size Approx 355mm x 50mm

With Spindle Safety Brake. Spindle 3 Morse Taper

Single Phase

Wheels Approx 150mm Dia

Single Phase

Ratio 3-0. Capacity 2" x 1"

With 150mm Dia 3 Jaw Chuck

Single Phase

Single Phase

Approx 100mm C/H x 762mm B.C. (4" x 30")

Single Phase

B Scale 100kg Load - C Scale 150 kg Load

0 - 25mm (0-1")

Single Phase - Internal Dimensions 178mm x 125mm x 400mm

Approx 90mm C/H x 457mm B.C. (3.5" x 18")

Single Phase

Surface Areas Approx 914mm x 608mm & 457mm x 457mm

Capacity 1120lbs - Untested

Untested

Untested

Table Area 700mm x 400mm. Tank Area Approx 1000mm x 600mm. Note: Requires Attention. Please note that this lot is located at Mold Systems, Brandon, Durham. This item must be removed from site by 30th of September

Any bids placed on this lot are not valid. 

Single Phase. Spindle 2 Morse Taper

Any bids placed on this lot are not valid. 

Single Phase. Spindle 2 Morse Taper

Any bids placed on this lot are not valid. 

Single Phase. Wheels 200mm Dia

Wheels 200mm Dia

Single Phase. Wheels 150mm Dia

Single Phase. Wheels 150mm Dia

Single Phase. Wheels 150mm Dia

100mm C/H

Area 914mm x 609mm

Wheels 200mm Dia

Screen Approx 228mm Dia

Area 914mm x 609mm

Single Phase

Size 600mm x 400mm each